Cisco A9K-SIP-700 Command Reference

Examples
This example (not applicable for BNG) shows how to enable IPv6 processing on GigabitEthernet interface
0/1/1/0:
RP/0/RSP0/CPU0:router(config)# interface gigabitethernet 0/1/1/0
RP/0/RSP0/CPU0:router(config-if)# ipv6 enable
For BNG, this example show how to enable IPv6 processing on dynamic template configuration mode:
RP/0/RSP0/CPU0:router(config)# dynamic-template type ppp foo
RP/0/RSP0/CPU0:router(config-dynamic-template-type)# ipv6 enable
Related Commands
DescriptionCommand
Displays the usability status of interfaces configured
for IPv6.
show ipv6 interface (BNG), on page 317
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
307
IPv4 and IPv6 Commands
ipv6 enable (BNG)

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English