Configures a network access server (NAS) to strip
both suffixes and/or prefixes from the username
before forwarding the username to the remote
RADIUS server.
username-strip
Enables prefix stripping and specifies the character
that will be recognized as a prefix delimiter.
prefix-delimiter
Enables suffix stripping and specifies the character
that will be recognized as a suffix delimiter.
suffix-delimiter
Suffix or prefix delimiter.
Delimiter
Command Default
None
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
The support for format-string keyword was added.Release 4.2.1
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
OperationTask ID
read, writeaaa
Examples
This is an example of configuring the aaa attribute format command in the Global Configuration mode:
RP/0/RSP0/CPU0:router(config)# aaa attribute format form1
RP/0/RSP0/CPU0:router(config-id-format)# format-string "%s%s"
RP/0/RSP0/CPU0:router(config-id-format)# username-strip prefix-delimiter @
Related Commands
DescriptionCommand
Creates an accounting list for subscriber accounting.aaa accounting subscriber, on page 5
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
10
BNG AAA Commands
aaa attribute format
To Next Page
Loading...
Need help?
General
