show dhcp ipv4 proxy profile
To display Dynamic Host Configuration Protocol (DHCP) proxy profile information, use the show dhcp ipv4
proxy profile command in the EXEC mode.
show dhcp ipv4 proxy profile{name| profile_name| }
Syntax Description
Displays the detailed proxy profile information.name
Specifies the profile name.
profile_name
Displays the output modifiers.|
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command displays the proxy profiles created for DHCP IPv4.
Task ID
OperationsTask ID
readip-services
Examples
This is the sample output of the show dhcp ipv4 proxy profile command:
RP/0/RSP0/CPU0:router# show dhcp ipv4 proxy profile
The show dhcp ipv4 proxy profile output is as follows:
Wed Jan 23 17:05:49.760 IST
DHCP IPv4 Proxy Profiles
--------------------------
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
201
BNG DHCP Commands
show dhcp ipv4 proxy profile
To Next Page
Loading...
Need help?
General
