ACL and ABF Commands
This module describes the Cisco IOS XR software commands used to configure the ACL and ABF commands
for Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details regarding the
related configurations, refer to the Cisco ASR 9000 Series Aggregation Services Router Broadband Network
Gateway Configuration Guide.
•
ipv4 access-group (BNG), page 66
•
ipv4 access-list (BNG), page 69
•
ipv6 access-group (BNG), page 71
•
ipv6 access-list (BNG), page 75
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
65
To Next Page
Loading...
Need help?
General
