match option
To match the proxy with the configured pattern, use the match option command in the DHCP IPv4 proxy
profile class configuration mode. To disable the match option, use the no form of the command.
match option {124| 125| | 60| 77} hex hex_string mask bit_mask_string
no match option {124| 125| | 60| 77} hex hex_string mask bit_mask_string
Syntax Description
Inserts option 124 vendor-identifying vendor class.124
Inserts option 125 vendor-identifying vendor-specific info.125
Inserts option 60 vendor class ID.60
Inserts option 124 user class.77
Inserts a hex pattern.hex
Specifies the hex pattern string.
hex_string
Inserts bit mask pattern.mask
Specifies the bit mask pattern string. The string pattern is between 0 and
4294967295.
bit_mask_string
Command Default
None
Command Modes
DHCP IPv4 proxy profile class configuration
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeip-services
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
175
BNG DHCP Commands
match option
To Next Page
Loading...
Need help?
General
