show vpdn redundancy
To display all vpdn redundancy related information, use the show vpdn redundancy command in the EXEC
mode.
show vpdn redundancy
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readnetwork
Examples
This is the sample output of the show vpdn redundancy command in the EXEC mode:
RP/0/RSP0/CPU0:router# show vpdn redundancy
VPDN HA STATUS : STEADY_STATE
VPDN HA SUMMARY
Total Sessions : 2000
Sessions Synced : 2000
VPDN HA TIME STAMPS
Init sync started : Dec 15 04:37:56
Init sync finished : Dec 15 04:37:56
Init sync aborted :
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
436
PPPoE LAC-Specific Commands
show vpdn redundancy
To Next Page
Loading...
Need help?
General
