l2tp-class
To create the l2tp class that needs to be used for L2TP parameters for the vpdn-group and to enter the l2tp
class configuration submode, use the l2tp-class command in Global Configuration mode. To disable this
feature, use the no form of this command.
l2tp-class {c1 | l1 | l2tp_class_name } [ authentication | congestion-control | digest | hello-interval | hidden
| hostname | ip | password | receive-window | retransmit | security | timeout | tunnel ]
no l2tp-class
Specifies the l2tp class name.c1
Specifies the l2tp class name.l1
Specifies the l2tp class name.
l2tp_class_name
Authenticates the L2TP control connection.authentication
Enables L2Tp congestion control.congestion-control
Specifies message digest configuration for L2TPv3
control connection.
digest
Hides AVPs in outgoing control messages.hello-interval
Sets HELLO message interval.hidden
Specifies the local hostname for control connection
authentication.
hostname
Specifies the settings for tunnel.ip
Specifies the password for control connection
authentication.
password
Receives the window size for control connection.receive-window
Specifies the control message retransmission
parameters.
retransmit
Specifies the L2TP security command.security
Specifies the control connection timeout parameters.timeout
Specifies the tunnel settings.tunnel
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
412
PPPoE LAC-Specific Commands
l2tp-class
To Next Page
Loading...
Need help?
General
