show dhcp ipv6 proxy statistics
To display the statistics for Dynamic Host Configuration Protocol (DHCP) proxy, use the show dhcp ipv6
proxy statistics command in EXEC mode.
show dhcp ipv6 proxy statistics{debug| location| vrf}
Syntax Description
Displays the debug statistics for the proxy.debug
Displays the node location for the proxy.location
Displays the proxy statistics by VRF.vrf
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readip-services
Examples
This is a sample output from the show dhcp ipv6 proxy statistics command:
RP/0/RSP0/CPU0:router# show dhcp ipv6 proxy statistics
Wed Sep 5 01:10:35.650 UTC
VRF | RX | TX | DR
|
-------------------------------------------------------------------------------------------
default | 23 | 28 | 0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
211
BNG DHCP Commands
show dhcp ipv6 proxy statistics
To Next Page
Loading...
Need help?
General
