PPPoE LAC-Specific Commands
This module describes the Cisco IOS XR software commands used to configure the PPPoE LAC-specific
commands for Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details
regarding the related configurations, refer to the Cisco ASR 9000 Series Aggregation Services Router
Broadband Network Gateway Configuration Guide.
•
l2tp-class, page 412
•
l2tp reassembly, page 414
•
process-failures switchover, page 415
•
redundancy (BNG), page 417
•
session-limit (BNG), page 418
•
template (BNG), page 420
•
tunnel, page 422
•
vpdn, page 424
•
vpn, page 426
•
show l2tpv2, page 428
•
show l2tpv2 redundancy, page 430
•
show l2tpv2 redundancy mirroring, page 432
•
show vpdn, page 434
•
show vpdn redundancy, page 436
•
show vpdn redundancy mirroring, page 438
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
411
To Next Page
Loading...
Need help?
General
