show subscriber database
To display the configuration details of subscriber database, use the show subscriber database command in
the EXEC mode.
show subscriber database {association| configuration| connection| interface| session {state| subscriber-label
label}| statistics| summary}
Syntax Description
Displays the association between subscriber sessions and dynamic
templates.
association
Displays the configuration database information.configuration
Displays subscriber client connection identifiers.connection
Displays the mapping between subscriber labels and interface handles.interface
Displays the show subscriber database statistics information.statistics
Displays the show subscriber database summary counts.summary
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Task ID
OperationTask ID
readnetwork
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
540
Subscriber Commands
show subscriber database
To Next Page
Loading...
Need help?
General
