radius-server attribute
To customize the selected radius attributes, use the radius-server attribute command in the Global
Configuration mode. To disable the Radius server attribute, use the no form of this command.
radius-server attribute list list_name [attribute {list| vendor-id value}]
no radius-server attribute list list_name [attribute {list| vendor-id value}]
Syntax Description
Specifies a list of attributes that are used in conjunction with server-groups
to accept or reject a list of attributes.
list
Specifies the list name.
list_name
Specifies a list of Radius attributes.attribute
Specifies the list of comma-delimited Radius attributes.
list
Specifies the vendor-id of the RADIUS attribute.vendor-id
Specifies the vendor-id value. The value ranges from 0 to 429496729.
value
Command Default
None
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeaaa
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
31
BNG AAA Commands
radius-server attribute
To Next Page
Loading...
Need help?
General
