Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readip-services
Examples
This is a sample output from the show dhcp ipv6 server interface command:
RP/0/RSP0/CPU0:router# show dhcp ipv6 server interface bundle-Ether 2.3
Tue Sep 4 05:02:03.861 UTC
Interface: Bundle-Ether2.3
VRF: abc
Mode: Server
Profile Name: test
Lease Limit: None
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
217
BNG DHCP Commands
show dhcp ipv6 server interface
To Next Page
Loading...
Need help?
General
