igmp accounting
To enable accounting feature under igmp, use the igmp accounting command in the Global Configuration
mode. To disable this feature, use the no form of this command.
igmp accounting{ max-history| number_of_days}
no igmp accounting{ max-history| number_of_days}
Syntax Description
Sets the maximum history for the accounting in days.max-history
Specifies the number of days the history has to be retained. This value
ranged from 1 to 365.
number_of_days
Command Default
If max-history is not specified, then the default is 0 days, which indicates that there was no history saved.
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writemulticast
Examples
This is an example of configuring the igmp accounting command in the Global Configuration mode:
RP/0/RSP0/CPU0:router # configure
RP/0/RSP0/CPU0:router(config)# router igmp accounting max-history 67
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
335
Multicast Commands
igmp accounting
To Next Page
Loading...
Need help?
General
