clear pppoe statistics
To clear the statistics of packets received and sent by the PPPoE sessions in BNG, use the clear pppoe
statistics command in the EXEC mode.
clear pppoe statistics [internal] location node-id
Syntax Description
Clears internal PPPoE statistics.internal
Clears PPPoE statistics for a given node.location
Specifies the node ID.
The node-id argument is entered in the
rack/slot/module notation.
node-id
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeppp
Examples
This example shows the sample output before and after clearing the PPPoE statistics:
RP/0/RSP0/CPU0:router# show pppoe statistics
Tue Feb 5 21:17:36.137 UTC
0/RSP1/CPU0
-----------
Packets Sent Received Dropped
----------------------------------------------------------------
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
462
PPPoE Commands
clear pppoe statistics
To Next Page
Loading...
Need help?
General
