Examples
The show running-config output for the above show lpts punt excessive-flow-trap command is:
RP/0/RSP0/CPU0:router# show running-config lpts punt excessive-flow-trap
lpts punt excessive-flow-trap
penalty-rate arp 15
penalty-rate pppoe 25
penalty-timeout arp 2
non-subscriber-interfaces
Related Commands
DescriptionCommand
Enables the Excessive Punt Flow Trap feature.lpts punt excessive-flow-trap, on page 252
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
262
Excessive Punt Flow Trap Commands
show lpts punt excessive-flow-trap
To Next Page
Loading...
Need help?
General
