show ppp statistics
To display the statistics information for PPP interfaces, use the show ppp statistics command in EXEC mode.
show ppp statistics{extended| {location| location}| interface| {interface-type| interface-path-id}| summary|
{location| location}}
Syntax Description
Displays the extended PPP statistics across all
interfaces.
extended
Displays the PPP statistics for a single interface.interface
Displays aggregated PPP statistics across all
interfaces.
summary
Displays the PPP statistics for interfaces at a location.location
Specifies the location details.
location
Interface type. For more information, use the question
mark (?) online help function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a
list of all interfaces currently configured on
the router.
Note
For more information about the syntax for the router,
use the question mark (?) online help function.
interface-path-id
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
405
BNG PPP Commands
show ppp statistics
To Next Page
Loading...
Need help?
General
