Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
read, writeip-services
Examples
This is an example of configuring the aaa group server radius command in the Global Configuration mode:
RP/0/RSP0/CPU0:router(config)#aaa group server radius SG1
RP/0/RSP0/CPU0:router(config-sg-radius)#server 99.1.1.10 auth-port 1812 acct-port 1813
RP/0/RSP0/CPU0:router(config-sg-radius)#throttle access 10 access-timeout 5 accounting 5
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
16
BNG AAA Commands
aaa group server radius (BNG)
To Next Page
Loading...
Need help?
General
