Related Commands
DescriptionCommand
Enables DHCP for IPv4 and enters
DHCP IPv4 configuration mode.
dhcp ipv4 (BNG), on page 147
Configures the DHCP relay agent
to relay packets to a specific DHCP
Server.
helper-address
Configures a relay profile for the
DHCP IPv4 component.
profile (BNG)
Enables the system to insert a
DHCP relay agent information
option in forwarded
BOOTREQUEST messages to a
DHCP server.
relay information option (BNG), on page 187
Configures the DHCP component
to not drop BOOTREQUEST
messages that have the relay
information option set and the
giaddr set to zero.
relay information option allow-untrusted (BNG), on page 189
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
186
BNG DHCP Commands
relay information check (BNG)
To Next Page
Loading...
Need help?
General
