show radius server-groups detail
To display the detailed summary of the RADIUS server group information, use the show radius server-groups
detail command in theEXEC mode.
show radius server-groups server_group_name detail
Syntax Description
Specifies the name of the RADIUS server group.
server_group_name
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readaaa
Examples
This is sample output of the show radius server-groups detail command:
RP/0/RSP0/CPU0:router# show radius server-groups SG1 detail
Wed Jan 18 06:04:59.432 EST
Server group 'SG1' has 1 server(s)
VRF (id 0x0)
Dead time: 0 minute(s) (inherited from global)
Contains 1 server(s)
Server 99.0.0.10/1812/1813
Authentication:
100 requests, 0 pending, 0 retransmits
100 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Throttled: 0 transactions, 0 timeout, 0 failures
Estimated Throttled Access Transactions: 0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
60
BNG AAA Commands
show radius server-groups detail
To Next Page
Loading...
Need help?
General
