Cisco A9K-SIP-700 Command Reference

show ipsubscriber summary
To display the summary information for the IP subscriber interfaces, use the show ipsubscriber summary
command in the EXEC mode.
show ipsubscriber summary location location
Syntax Description
Specifies the IP subscriber location.location
Specifies the fully qualified location specification.
location
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readnetwork
Examples
This is the sample output of the show ipsubscriber summary command:
RP/0/RSP0/CPU0:router# show ipsubscriber summary
IPSUB Summary for all nodes
Interface Counts:
DHCP Pkt Trigger
---------- ------------
Invalid: 0 0
Initialized: 0 0
Session creation started: 0 0
Control-policy executing: 0 0
Control-policy executed: 0 0
Session features applied: 0 0
VRF configured: 0 0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
293
IPoE Commands
show ipsubscriber summary

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English