BNG AAA Commands
This module describes the Cisco IOS XR software commands used to configure the AAA commands for
Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details regarding the related
configurations, refer to the Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway
Configuration Guide.
•
aaa accounting service, page 3
•
aaa accounting subscriber, page 5
•
aaa accounting system rp-failover, page 7
•
aaa attribute format, page 9
•
aaa authentication subscriber, page 11
•
aaa authorization subscriber, page 13
•
aaa group server radius (BNG), page 15
•
aaa intercept, page 17
•
aaa radius attribute, page 19
•
aaa service-accounting, page 21
•
aaa server radius dynamic-author, page 23
•
aaa radius attribute nas-port-type, page 25
•
accounting aaa list, page 27
•
accounting aaa list type service, page 29
•
radius-server attribute, page 31
•
radius-server dead-criteria, page 33
•
radius-server deadtime (BNG), page 35
•
radius-server disallow null-username, page 37
•
radius-server host (BNG), page 38
•
radius-server ipv4 dscp, page 41
•
radius-server key (BNG), page 42
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
1
To Next Page
Loading...
Need help?
General
