Examples
This is the sample output of the show igmp vrf command:
RP/0/RSP0/CPU0:router#show igmp vrf vrf1 summary
The show igmp vrf vrf1 summary output is as follows:
Thu Feb 7 10:02:24.457 GMT
Robustness Value 2
No. of Group x Interfaces 10
Maximum number of Group x Interfaces 50000
Supported Interfaces : 2
Unsupported Interfaces : 0
Enabled Interfaces : 2
Disabled Interfaces : 0
MTE tuple count : 0
Interface Number Max #
Groups Groups
BVI1 7 10
Loopback1001 3 25000
RP/0/RSP0/CPU0:router#show igmp vrf vrf1 interface bvi1
Thu Feb 7 10:02:48.231 GMT
BVI1 is up, line protocol is up
Internet address is 172.16.251.1/30
IGMP is enabled on interface
Current IGMP version is 3
IGMP query interval is 60 seconds
IGMP querier timeout is 125 seconds
IGMP max query response time is 10 seconds
Last member query response interval is 1 seconds
IGMP activity: 26 joins, 19 leaves
IGMP querying router is 172.16.251.1 (this system)
Time elapsed since last query sent 00:00:41
Time elapsed since IGMP router enabled 3w3d
Time elapsed since last report received 00:00:32
This table describes the significant fields shown in the display.
Table 24: show igmp vrf Field Descriptions
DescriptionField
Specifies the number of supported interfaces.Supported Interfaces
Specifies the number of unsupported interfaces.Unsupported Interfaces
Specifies the number of interfaces that are enabled.Enabled Interfaces
Specifies the number of interfaces that are disabled.Disabled Interfaces
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
350
Multicast Commands
show igmp vrf (BNG)
To Next Page
Loading...
Need help?
General
