Examples
This example (not applicable for BNG) configures an IPv6 neighbor solicit transmission interval of 9000
milliseconds for GigabitEthernet interface 0/1/1/0:
RP/0/RSP0/CPU0:router(config)# interface gigabitethernet 0/1/1/0
RP/0/RSP0/CPU0:router(config-if)# ipv6 nd ns-interval 9000
For BNG, this example configures an IPv6 neighbor solicit transmission interval of 9000 milliseconds in the
dynamic template configuration mode:
RP/0/RSP0/CPU0:router(config)# dynamic-template type ppp p1
RP/0/RSP0/CPU0:router(config-dynamic-template-type)# ipv6 nd ns-interval 9000
Related Commands
DescriptionCommand
Displays the usability status of interfaces configured
for IPv6.
show ipv6 interface (BNG), on page 317
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
361
Neighbor Discovery Commands
ipv6 nd ns-interval (BNG)
To Next Page
Loading...
Need help?
General
