Examples
This example shows how a limit of four configure requests is specified in the dynamic template configuration
mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# dynamic-template type ppp p1
RP/0/RSP0/CPU0:router(config-dynamic-template-type)# ppp ipcp
Related Commands
DescriptionCommand
Configures the maximum number of consecutive CONFNAKs to
permit before terminating a negotiation.
ppp max-failure (BNG), on page 391
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
390
BNG PPP Commands
ppp max-configure (BNG)
To Next Page
Loading...
Need help?
General
