Limits or throttles IWF PPPoE sessions from any one
mac-address.
mac-iwf
Sets a per-card session limit.max
Specifies the action of limiting the PPPoE sessions for
various attributes.
limit
Specifies the access-interface session limit. The value
ranges from 1 to 65535.
session_limit
Enables modification of tag configuration.tag
Modifies the ppp-max-payload configuration and allows
to configure minimum and maximum payloads.
ppp-max-payload
Ignores the ppp-max-payload tag.deny
Configures the minimum payload.minimum
Specifies the value of the minimum payload. The value
ranges from 500 to 2000.
minimum_payload
Command Default
None
Command Modes
Global Configuration mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
BBA-Groups are configured globally (these are essentially configuration templates), containing the PPPoE
configuration settings.
When this configuration changes to use a different BBAGroup, then all existing PPPoE sessions running
under the interface are terminated.
Task ID
OperationTask ID
read, writeppp
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
451
PPPoE Commands
pppoe bba-group
To Next Page
Loading...
Need help?
General
