Subscriber Commands
This module describes the Cisco IOS XR software commands used to configure the subscriber commands
for Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details regarding the
related configurations, refer to the Cisco ASR 9000 Series Aggregation Services Router Broadband Network
Gateway Configuration Guide.
•
access-tracking, page 511
•
accounting interim variation, page 513
•
core-tracking, page 515
•
disable (subscriber redundancy), page 516
•
hold-timer (subscriber redundancy), page 518
•
interface-list, page 520
•
preferred-role, page 522
•
source-interface (subscriber redundancy), page 524
•
subscriber redundancy, page 525
•
subscriber redundancy group, page 526
•
subscriber redundancy switchover, page 528
•
subscriber redundancy synchronize, page 530
•
subscriber session limit, page 532
•
tracking-disable, page 534
•
virtual-mac, page 535
•
virtual-mac-disable, page 537
•
virtual-mac-prefix, page 538
•
show subscriber database, page 540
•
show subscriber feature accounting, page 545
•
show subscriber manager sadb, page 547
•
show subscriber manager statistics, page 549
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
509
To Next Page
Loading...
Need help?
General
