RP/0/RSP0/CPU0:router(config)# subscriber session limit 100000
This example shows how to remove the subscriber sessions limit configuration:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# no subscriber session limit
Related Commands
DescriptionCommand
Displays the subscriber management session information.show subscriber session, on page 566
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
533
Subscriber Commands
subscriber session limit
To Next Page
Loading...
Need help?
General
