Utility Error1 0
Utility Error2 0
Utility Error3 0
Utility Error4 0
Utility Error5 0
Utility Error6 0
Utility Error7 0
Utility Error8 0
Utility Error9 0
Utility Error10 0
Utility Error11 0
MA-CoA RB Success 5
MA-CoA RB Failure 0
Subdb Recon Begin 1
Subdb Recon End 1
In the above show output, see the MA-CoA RB Success and MA-CoA RB Failure rows to fetch debug
information related to MA-CoA rollback success and failures.
RP/0/0/CPU0:# show subscriber manager statistics perf non-zero
Tue Jun 3 13:14:34.547 IST
[ IEDGE PERFORMANCE DATA ]
Type Ave(ms) StdDev(ms) Min(ms) Max(ms) Count
==== ======= ========== ======= ======= =====
RP/0/0/CPU0:# show subscriber manager statistics performance
Tue Jun 3 13:14:34.547 IST
[ IEDGE PERFORMANCE DATA ]
Type Ave(ms) StdDev(ms) Min(ms) Max(ms)
==== ======= ========== ======= =======
Transactions:
Absolute-timeout request 0.0 0.0 0.0 0.0
Account logon event 0.0 0.0 0.0 0.0
Account logoff event 0.0 0.0 0.0 0.0
Account update event 0.0 0.0 0.0 0.0
Accounting request 0.0 0.0 0.0 0.0
Authentication continue 0.0 0.0 0.0 0.0
Session Activate request 0.0 0.0 0.0 0.0
Bind request 0.0 0.0 0.0 0.0
Flow disconnect ack 0.0 0.0 0.0 0.0
Flow disconnect event 0.0 0.0 0.0 0.0
Flow disconnect request 0.0 0.0 0.0 0.0
Flow start request 0.0 0.0 0.0 0.0
Idle Timeout request 0.0 0.0 0.0 0.0
Identity release request 0.0 0.0 0.0 0.0
Session update request 0.0 0.0 0.0 0.0
Keepalive status request 0.0 0.0 0.0 0.0
Link status request 0.0 0.0 0.0 0.0
Prepaid request 0.0 0.0 0.0 0.0
Service start event 0.0 0.0 0.0 0.0
Service stop event 0.0 0.0 0.0 0.0
Session disconnect ack 0.0 0.0 0.0 0.0
Session disconnect event 0.0 0.0 0.0 0.0
Session disconnect request 0.0 0.0 0.0 0.0
Session kill event 0.0 0.0 0.0 0.0
Session start request 0.0 0.0 0.0 0.0
Timer expiry event 0.0 0.0 0.0 0.0
Session deactivate request 0.0 0.0 0.0 0.0
Passthru Accounting request 0.0 0.0 0.0 0.0
Author no response event 0.0 0.0 0.0 0.0
Author failed event 0.0 0.0 0.0 0.0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
555
Subscriber Commands
show subscriber manager statistics
To Next Page
Loading...
Need help?
General
