Subscriber Redundancy Group ID: 210
Description : <<not-configured>>
Status : Enabled
Init-Role : Master
Negotiated-Role : Master Current-Role : Master
Slave-mode : Hot Hold Time : 15
Virtual MAC Address : 0000.0000.2020
L2TP Source Address : <<not-configured>>
Core-Tracking : <<not-configured>>
Status : n/a
Access-Tracking : vlan210
Status : Up
Tracking Status : Enabled
Peer:
11::2 Status : Established
Role(Init/Neg/Cur): Slave/Slave/Slave
Tracking Status : Down
Last Neg-Time : 2014 Sep 12 07:12:11
Last Up-Time : 2014 Sep 11 14:47:55
Last Down-Time : 2014 Sep 11 14:26:45
Switchover:
Last Switchover : 2014 Sep 12 07:12:11 Reason : Object Tracking Status Change
Switchover Count : 4
Hold Time : Not-Running
Subscriber Session Statistics:
Count : 8000 Slave-Upd-Fail : 0
Pending Update : 0 Pending Delete : 0
Tunnel Count : 0
Interface Count : 1
Bundle-Ether1.10 Map-ID : 210
This table describes the significant fields shown in the display:
DescriptionField
Specifies if master-slave preference is set.Init-role
Specifies the desired role during previous and next
role negotiation exchange.
Negotiated-role
Specifies the current role assumed.Current-role
This is a sample output of the show subscriber redundancy group session command:
RP/0/RSP0/CPU0:routershow subscriber redundancy group 210 session
Subscriber Redundancy Agent Group Session
------------------------------------------------------------------------------
Parent Interface | MAC Address | In/Out VLAN | PPPoE/L2TP ID
------------------------------------------------------------------------------
Bundle-Ether1.10 0000.680b.0102 0/210 0/0
Bundle-Ether1.10 0000.680b.0103 0/210 0/0
Bundle-Ether1.10 0000.680b.0104 0/210 0/0
Bundle-Ether1.10 0000.680b.0105 0/210 0/0
Bundle-Ether1.10 0000.680b.0106 0/210 0/0
Bundle-Ether1.10 0000.680b.0107 0/210 0/0
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
559
Subscriber Commands
show subscriber redundancy group
To Next Page
Loading...
Need help?
General
