Last COA request received: unavailable
This sample output of show subscriber session all command, displays the active IPv4 or IPv6 client sessions
for a dual-stack configuration.
RP/0/RSP0/CPU0:router# show subscriber session all
Tue Jan 29 12:49:25.237 UTC
Codes: IN - Initialize, CN - Connecting, CD - Connected, AC - Activated,
ID - Idle, DN - Disconnecting, ED - End
Type Interface State Subscriber IP Addr / Prefix
LNS Address (Vrf)
--------------------------------------------------------------------------------
IP:DHCP BE1.10.ip22 AC 10.10.10.10 (default)
2001::2 (default)
This sample output of show subscriber session all detail command, displays the detailed information of the
active IPv4 or IPv6 client sessions for a dual-stack configuration.
RP/0/RSP0/CPU0:router# show subscriber session all detail
Tue Jan 29 12:49:27.752 UTC
Interface: Bundle-Ether1.10.ip22
Circuit ID: Unknown
Remote ID: Unknown
Type: IP: DHCP-trigger
IPv4 State: Up, Tue Jan 29 12:46:32 2013
IPv4 Address: 10.10.10.10, VRF: default
IPv6 State: Up, Tue Jan 29 12:46:42 2013
IPv6 Address: 2001::2, VRF: default
IPv6 Interface ID: ..d..... (02 00 64 ff fe 01 01 02)
Mac Address: 0000.6401.0102
Account-Session Id: 0000001c
Nas-Port: Unknown
User name: 0000.6401.0102
Outer VLAN ID: 10
Subscriber Label: 0x00000055
Created: Tue Jan 29 12:46:32 2013
State: Activated
Authentication: unauthenticated
Access-interface: Bundle-Ether1.10
Policy Executed:
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
572
Subscriber Commands
show subscriber session
To Next Page
Loading...
Need help?
General
