Specifies the node whose subscriber sessions you
want to delete. The node-id argument is entered in
the rack/slot/module notation.
node-id
Command Default
None
Command Modes
Release 5.2.0
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
executenetwork
Examples
This example shows how to clear all the subscriber sessions in a particular node location:
RP/0/RSP0/CPU0:router# clear subscriber session all location 0/RSP0/CPU0
Related Commands
DescriptionCommand
Displays the subscriber management session information.show subscriber session, on page 566
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
575
Subscriber Commands
clear subscriber session
To Next Page
Loading...
Need help?
General
