Cisco Catalyst 3560-X User Manual

1-8
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Appendix 1 Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with the Flash File System
This example shows how to create a file. This command writes the contents of the new-configs directory
on the local flash device to a file named saved. on the TFTP server at 172.20.10.30:
Switch# archive /create tftp:172.20.10.30/saved. flash:/new-configs
Note The following examples show Catalyst 3750-E switch outputs. The outputs would be similar for the
Catalyst 3750-X and 3560-X.
This example shows how to display the contents of a switch file that is in flash memory.
Switch# archive /table flash:.
info (219 bytes)
/ (directory)
/html/ (directory)
/html/foo.html (0 bytes)
/.bin (610856 bytes)
/info (219 bytes)
This example shows how to display only the /html directory and its contents:
Switch# archive /table flash: /html
/html
/html/ (directory)
/html/const.htm (556 bytes)
/html/xhome.htm (9373 bytes)
/html/menu.css (1654 bytes)
<output truncated>
This example shows how to extract the contents of a file located on the TFTP server at 172.20.10.30.
Switch# archive /xtract tftp:/172.20.10.30/saved. flash:/new-configs
Step 3
archive /xtract source-url
flash:/file-url [dir/file...]
Extract a file into a directory on the flash file system.
For source-url, specify the source URL alias for the local file system. The
-filename. is the file from which to extract files. These options are supported:
• local flash file system syntax:
flash:
• FTP syntax:
ftp:[[//username[:password]@location]/directory]/-filename.
• RCP syntax:
rcp:[[//username@location]/directory]/-filename.
• TFTP syntax:
tftp:[[//location]/directory]/-filename.
For flash:/file-url [dir/file...], specify the location on the local flash file system
from which the file is extracted. Use the dir/file... option to specify a list of files
or directories within the file to be extracted. If none are specified, all files and
directories are extracted.
Step 4
more [/ascii | /binary | /ebcdic]
file-url
Display the contents of any readable file, including a file on a remote file
system.
Command Purpose

Cisco Catalyst 3560-X Specifications

General

Enclosure Type	Rack-mountable - 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 + 4 x SFP
Flash Memory	64 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Device Type	Switch
Performance	Switching capacity: 128 Gbps
Jumbo Frame Support	Yes
Routing Protocol	RIP-1, RIP-2, EIGRP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS
Features	DHCP support, VLAN support, QoS, IPv6 support, Syslog
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.3at
Stacking	Stackable
Security Features	SSH, RADIUS, TACACS+
Management	CLI
Dimensions (H x W x D)	17.5 in
Operating Temperature	32 to 113 °F (0 to 45 °C)
Humidity	10 - 95% (non-condensing)