Cisco Catalyst 3560-X - Page 1513

Index
IN-33
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
route 1-34
settings 1-28
described 1-27
for IPv6 1-11
interface parameters, configuring 1-32
LSA group pacing 1-36
monitoring 1-37
router IDs 1-36
route summarization 1-34
support for 1-16
virtual links 1-34
out-of-profile markdown 1-15
P
packet modification, with QoS 1-22
PAgP
Layer 2 protocol tunneling
1-10
See EtherChannel
parallel paths, in routing tables
1-93
passive interfaces
configuring
1-103
OSPF 1-35
passwords
default configuration
1-2
disabling recovery of 1-5
encrypting 1-3
for security 1-11
in clusters 1-14
overview 1-1
recovery of 1-3
setting
enable
1-3
enable secret 1-3
Telnet 1-6
with usernames 1-6
VTP domain 1-10
path cost
MSTP
1-21
STP 1-21
path MTU discovery 1-4
payload encryption 1-1
PBR
defined
1-99
enabling 1-101
fast-switched policy-based routing 1-102
local policy-based routing 1-102
PC (passive command switch) 1-10
peers, BGP 1-60
percentage thresholds in tracked lists 1-6
performance, network design 1-23
performance features 1-4
persistent self-signed certificate 1-49
per-user ACLs and Filter-Ids 1-8
per-VLAN spanning-tree plus
See PVST+
PE to CE routing, configuring
1-86
physical ports 1-3
PIM
default configuration
1-11
dense mode
overview
1-4
rendezvous point (RP), described 1-5
RPF lookups 1-9
enabling a mode 1-13
overview 1-4
router-query message interval, modifying 1-38
shared tree and source tree, overview 1-35
shortest path tree, delaying the use of 1-37
sparse mode
join messages and shared tree
1-5
overview 1-5
prune messages 1-5
RPF lookups 1-9
stub routing
configuration guidelines
1-22
enabling 1-23
overview 1-5