Cisco Catalyst 3560-X - Page 1532

Index
IN-52
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Token Ring VLANs
support for
1-5
VTP support 1-5
ToS 1-15
traceroute, Layer 2
and ARP
1-17
and CDP 1-17
broadcast traffic 1-16
described 1-16
IP addresses and subnets 1-17
MAC addresses and VLANs 1-17
multicast traffic 1-17
multiple devices on a port 1-17
unicast traffic 1-16
usage guidelines 1-17
traceroute command
See also IP traceroute
tracked lists
configuring
1-3
types 1-3
tracked objects
by Boolean expression
1-4
by threshold percentage 1-6
by threshold weight 1-5
tracking interface line-protocol state 1-2
tracking IP routing state 1-2
tracking objects 1-1
tracking process 1-1
track state, tracking IP SLAs 1-9
traffic
blocking flooded
1-8
fragmented 1-6
fragmented IPv6 1-2
unfragmented 1-6
traffic policing 1-15
traffic suppression 1-1
transmit hold-count
see STP
transparent mode, VTP
1-4
trap-door mechanism 1-2
traps
configuring MAC address notification
1-15, 1-17, 1-18
configuring managers 1-12
enabling 1-15, 1-17, 1-18, 1-12
notification types 1-12
overview 1-1, 1-4
troubleshooting
connectivity problems
1-15, 1-16, 1-18
CPU utilization 1-29
detecting unidirectional links 1-1
displaying crash information 1-24
PIMv1 and PIMv2 interoperability problems 1-35
setting packet forwarding 1-22
SFP security and identification 1-14
show forward command 1-22
with CiscoWorks 1-4
with debug commands 1-20
with ping 1-15
with system message logging 1-1
with traceroute 1-18
trunk failover
See link-state tracking
trunking encapsulation
1-10
trunk ports
configuring
1-18
defined 1-4, 1-3
encapsulation 1-18, 1-23
trunks
allowed-VLAN list
1-19
configuring 1-18, 1-23
ISL 1-15
load sharing
setting STP path costs
1-24
using STP port priorities 1-22, 1-23
native VLAN for untagged traffic 1-21
parallel 1-24
pruning-eligible list 1-20
to non-DTP device 1-15