Cisco Catalyst 3560-X User Manual

1-5
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Chapter 1 Configuring Catalyst 3750-X StackPower
Understanding Cisco StackPower
Temperature State: GREEN
Yellow Threshold : 49 Degree Celsius
Red Threshold : 59 Degree Celsius
SW PID Serial# Status Sys Pwr PoE Pwr Watts
-- ------------------ ---------- --------------- ------- ------- -----
1A NG3K-PWR-715WAC LIT133705FH OK Good Good 715/0
1B C3KX-PWR-715WAC DTN1341K018 Disabled Good Good 715/0
2A Not Present
2B C3KX-PWR-325WAC LIT13330FNM Disabled Good Good 325/0
3A C3KX-PWR-325WAC LIT13330FN3 Disabled Good Good 325/0
3B Not Present
4A C3KX-PWR-350WAC DTN1342L00T OK Good Good 350/0
4B NG3K-PWR-1100WAC LIT13370577 OK Good Good 1100/0
<output truncated>
The output of the show stack-power privileged EXEC command shows the priorities of the powered
devices and switches in the power stack.
Switch# show stack-power
Power stack name: Powerstack1
Stack mode: Power sharing
Switch 1:
Power budget: 206
Low port priority value: 17
High port priority value: 16
Switch priority value: 2
Port A status: Not shut
Port B status: Not shut
Neighbor on port A: 0022.bdcf.ab00
Neighbor on port B: 0022.bdd0.4380
Switch 2:
Power budget: 206
Low port priority value: 12
High port priority value: 11
Switch priority value: 1
Port A status: Not shut
Port B status: Not shut
Neighbor on port A: 0022.bdd0.6d00
Neighbor on port B: 0022.bdcf.af80
Switch 3:
Power budget: 656
Low port priority value: 22
High port priority value: 21
Switch priority value: 3
Port A status: Not shut
Port B status: Not shut
Neighbor on port A: 0022.bdcf.af80
Neighbor on port B: 0022.bdd0.6d00
Switch 4:
Power budget: 682
Low port priority value: 27
High port priority value: 26
Switch priority value: 4
Port A status: Not shut
Port B status: Not shut
Neighbor on port A: 0022.bdd0.4380
Neighbor on port B: 0022.bdcf.ab00

Cisco Catalyst 3560-X Specifications

General

Enclosure Type	Rack-mountable - 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 + 4 x SFP
Flash Memory	64 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Device Type	Switch
Performance	Switching capacity: 128 Gbps
Jumbo Frame Support	Yes
Routing Protocol	RIP-1, RIP-2, EIGRP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS
Features	DHCP support, VLAN support, QoS, IPv6 support, Syslog
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.3at
Stacking	Stackable
Security Features	SSH, RADIUS, TACACS+
Management	CLI
Dimensions (H x W x D)	17.5 in
Operating Temperature	32 to 113 °F (0 to 45 °C)
Humidity	10 - 95% (non-condensing)