Cisco Catalyst 3560-X User Manual

53
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Preface
Audience
This guide is for the networking professional managing the standalone Catalyst 3750-X or 3560-X
switch or the Catalyst 3750-X switch stack, referred to as the switch. Before using this guide, you should
have experience working with the Cisco IOS software and be familiar with the concepts and terminology
of Ethernet and local area networking.
Purpose
This guide provides procedures for using the commands that have been created or changed for use with
the Catalyst 3750-X or 3560-X switches. It does not provide detailed information about these
commands.
• For detailed information about these commands, see the command reference for this release.
• For information about the standard Cisco IOS commands, see the Cisco IOS Master Command List,
All Releases from the Cisco IOS Software Releases 15.0 Mainline Master Index page on Cisco.com:
http://www.cisco.com/en/US/products/ps10591/products_product_indices_list.html
This guide does not provide detailed information on the GUIs for the embedded device manager or for
Cisco Network Assistant (hereafter referred to as Network Assistant) that you can use to manage the
switch. However, the concepts in this guide are applicable to the GUI user. For information about the
device manager, see the switch online help. For information about Network Assistant, see Getting
Started with Cisco Network Assistant, available on Cisco.com.
This guide does not describe system messages you might encounter or how to install your switch. For
more information, see the system message guide for this release and the Catalyst 3750-X and 3560-X
Switch Hardware Installation Guide.
For documentation updates, see the release notes for this release.

Cisco Catalyst 3560-X Specifications

General

Enclosure Type	Rack-mountable - 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 + 4 x SFP
Flash Memory	64 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Device Type	Switch
Performance	Switching capacity: 128 Gbps
Jumbo Frame Support	Yes
Routing Protocol	RIP-1, RIP-2, EIGRP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS
Features	DHCP support, VLAN support, QoS, IPv6 support, Syslog
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.3at
Stacking	Stackable
Security Features	SSH, RADIUS, TACACS+
Management	CLI
Dimensions (H x W x D)	17.5 in
Operating Temperature	32 to 113 °F (0 to 45 °C)
Humidity	10 - 95% (non-condensing)