Cisco Catalyst 3560-X

Contents
5
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Configuring Storm Control 1-1
Configuring Protected Ports 1-6
Configuring Port Blocking 1-7
Configuring Port Security 1-8
Configuring Protocol Storm Protection 1-19
Displaying Port-Based Traffic Control Settings 1-21
Understanding LLDP, LLDP-MED, and Wired Location Service 1-1
Configuring LLDP, LLDP-MED, and Wired Location Service 1-5
Monitoring and Maintaining LLDP, LLDP-MED, and Wired Location Service 1-11
Understanding UDLD 1-1
Configuring UDLD 1-4
Displaying UDLD Status 1-7
Understanding SPAN and RSPAN 1-1
Understanding Flow-Based SPAN 1-11
Configuring SPAN and RSPAN 1-12
Configuring FSPAN and FRSPAN 1-24
Displaying SPAN, RSPAN. FSPAN, and FRSPAN Status 1-28
Understanding RMON 1-1
Configuring RMON 1-2
Displaying RMON Status 1-6
Understanding System Message Logging 1-1
Configuring System Message Logging 1-2
Configuring Smart Logging 1-14
Displaying the Logging Configuration 1-17
Understanding SNMP 1-1
Configuring SNMP 1-6
Displaying SNMP Status 1-19
Understanding Embedded Event Manager 1-1
Configuring Embedded Event Manager 1-6
Displaying Embedded Event Manager Information 1-8
Understanding ACLs 1-2
Configuring IPv4 ACLs 1-7
Creating Named MAC Extended ACLs 1-29
Configuring VLAN Maps 1-32
Using VLAN Maps with Router ACLs 1-40