Index
IN-47
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
SNMP
accessing MIB variables with 35-4
agent
described
35-4
disabling 35-7
and IP SLAs 45-2
authentication level 35-10
community strings
configuring
35-8
for cluster switches 35-4
overview 35-4
configuration examples 35-18
default configuration 35-6
engine ID 35-7
groups 35-7, 35-9
host 35-7
ifIndex values 35-5
in-band management 1-7
in clusters 6-14
informs
and trap keyword
35-12
described 35-5
differences from traps 35-5
disabling 35-15
enabling 35-15
limiting access by TFTP servers 35-17
limiting system log messages to NMS 34-10
manager functions 1-6, 35-3
managing clusters with 6-17
MIBs
location of
A-4
supported A-1
notifications 35-5
overview 35-1, 35-4
security levels 35-3
setting CPU threshold notification 35-16
status, displaying 35-19
system contact and location 35-16
trap manager, configuring 35-14
SNMP (continued)
traps
described
35-3, 35-5
differences from informs 35-5
disabling 35-15
enabling 35-12
enabling MAC address notification 7-22, 7-24,
7-25
overview 35-1, 35-4
types of 35-12
users 35-7, 35-9
versions supported 35-2
SNMP and Syslog Over IPv6 43-7
SNMPv1 35-2
SNMPv2C 35-2
SNMPv3 35-2
snooping, IGMP 26-2
software compatibility
See stacks, switch
software images
location in flash
B-26
recovery procedures 51-2
scheduling reloads 3-22
tar file format, described B-26
See also downloading and uploading
software images in mixed stacks
See the Cisco Software Activation and Compatibility
Document
source addresses
in IPv4 ACLs
37-12
in IPv6 ACLs 38-5
source-and-destination-IP address based forwarding,
EtherChannel
40-9
source-and-destination MAC address forwarding,
EtherChannel
40-9
source-IP address based forwarding, EtherChannel 40-9
source-MAC address forwarding, EtherChannel 40-8
Source-specific multicast
See SSM
To Next Page
Loading...
