Cisco Catalyst 3750-X - Page 1424

Index
IN-48
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
SPAN
and stack changes 32-10
configuration guidelines 32-12
default configuration 32-12
destination ports 32-8
displaying status 32-28
interaction with other features 32-9
monitored ports 32-7
monitoring ports 32-8
overview 1-15, 32-1
ports, restrictions 28-12
received traffic 32-6
session limits 32-12
sessions
configuring ingress forwarding
32-16, 32-23
creating 32-13, 32-25
defined 32-4
limiting source traffic to specific VLANs 32-16
removing destination (monitoring) ports 32-14
specifying monitored ports 32-13, 32-25
with ingress traffic enabled 32-15
source ports 32-7
transmitted traffic 32-6
VLAN-based 32-7
spanning tree and native VLANs 15-17
Spanning Tree Protocol
See STP
SPAN traffic
32-6
split horizon, RIP 42-23
SRR
configuring
shaped weights on egress queues
39-85
shared weights on egress queues 39-86
shared weights on ingress queues 39-78
described 39-15
shaped mode 39-15
shared mode 39-16
support for 1-13
SSH
configuring
10-46
described 1-7, 10-45
encryption methods 10-45
switch stack considerations 5-17
user authentication methods, supported 10-45
SSL
configuration guidelines
10-52
configuring a secure HTTP client 10-54
configuring a secure HTTP server 10-53
described 10-49
monitoring 10-55
SSM
address management restrictions
48-16
CGMP limitations 48-16
components 48-14
configuration guidelines 48-16
configuring 48-14, 48-17
differs from Internet standard multicast 48-14
IGMP snooping 48-16
IGMPv3 48-14
IGMPv3 Host Signalling 48-15
IP address range 48-15
monitoring 48-17
operations 48-15
PIM 48-14
state maintenance limitations 48-16
SSM mapping 48-17
configuration guidelines 48-17
configuring 48-17, 48-20
DNS-based 48-19, 48-20
monitoring 48-22
overview 48-18
restrictions 48-18
static 48-18, 48-20
static traffic forwarding 48-21
stack changes
effects on
IPv6 routing
43-10