Cisco Catalyst 3750-X - Page 25

Contents
xxv
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Configuring TCN-Related Commands 26-11
Controlling the Multicast Flooding Time After a TCN Event 26-11
Recovering from Flood Mode 26-12
Disabling Multicast Flooding During a TCN Event 26-12
Configuring the IGMP Snooping Querier 26-13
Disabling IGMP Report Suppression 26-14
Displaying IGMP Snooping Information 26-15
Understanding Multicast VLAN Registration 26-16
Using MVR in a Multicast Television Application 26-17
Configuring MVR 26-19
Default MVR Configuration 26-19
MVR Configuration Guidelines and Limitations 26-19
Configuring MVR Global Parameters 26-20
Configuring MVR Interfaces 26-21
Displaying MVR Information 26-22
Configuring IGMP Filtering and Throttling 26-23
Default IGMP Filtering and Throttling Configuration 26-23
Configuring IGMP Profiles 26-24
Applying IGMP Profiles 26-25
Setting the Maximum Number of IGMP Groups 26-26
Configuring the IGMP Throttling Action 26-26
Displaying IGMP Filtering and Throttling Configuration 26-28
CHAPTER 27 Configuring IPv6 MLD Snooping 27-1
Understanding MLD Snooping 27-1
MLD Messages 27-3
MLD Queries 27-3
Multicast Client Aging Robustness 27-3
Multicast Router Discovery 27-4
MLD Reports 27-4
MLD Done Messages and Immediate-Leave 27-4
Topology Change Notification Processing 27-5
MLD Snooping in Switch Stacks 27-5
Configuring IPv6 MLD Snooping 27-5
Default MLD Snooping Configuration 27-6
MLD Snooping Configuration Guidelines 27-6
Enabling or Disabling MLD Snooping 27-7
Configuring a Static Multicast Group 27-8
Configuring a Multicast Router Port 27-8