Cisco Catalyst 3750-X - Page 26

Contents
xxvi
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Enabling MLD Immediate Leave 27-9
Configuring MLD Snooping Queries 27-10
Disabling MLD Listener Message Suppression 27-11
Displaying MLD Snooping Information 27-12
CHAPTER 28 Configuring Port-Based Traffic Control 28-1
Configuring Storm Control 28-1
Understanding Storm Control 28-1
Default Storm Control Configuration 28-3
Configuring Storm Control and Threshold Levels 28-3
Configuring Small-Frame Arrival Rate 28-5
Configuring Protected Ports 28-6
Default Protected Port Configuration 28-6
Protected Port Configuration Guidelines 28-7
Configuring a Protected Port 28-7
Configuring Port Blocking 28-7
Default Port Blocking Configuration 28-8
Blocking Flooded Traffic on an Interface 28-8
Configuring Port Security 28-8
Understanding Port Security 28-9
Secure MAC Addresses 28-9
Security Violations 28-10
Default Port Security Configuration 28-11
Port Security Configuration Guidelines 28-11
Enabling and Configuring Port Security 28-13
Enabling and Configuring Port Security Aging 28-17
Port Security and Switch Stacks 28-18
Port Security and Private VLANs 28-18
Displaying Port-Based Traffic Control Settings 28-19
CHAPTER 29 Configuring CDP 29-1
Understanding CDP 29-1
CDP and Switch Stacks 29-2
Configuring CDP 29-2
Default CDP Configuration 29-2
Configuring the CDP Characteristics 29-2
Disabling and Enabling CDP 29-3
Disabling and Enabling CDP on an Interface 29-4
Monitoring and Maintaining CDP 29-5