Cisco Catalyst 3750-X

Contents
xxxiv
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Configuring Layer 3 EtherChannels 40-15
Creating Port-Channel Logical Interfaces 40-15
Configuring the Physical Interfaces 40-16
Configuring EtherChannel Load-Balancing 40-18
Configuring the PAgP Learn Method and Priority 40-19
Configuring LACP Hot-Standby Ports 40-20
Configuring the LACP System Priority 40-21
Configuring the LACP Port Priority 40-22
Displaying EtherChannel, PAgP, and LACP Status 40-22
Understanding Link-State Tracking 40-23
Configuring Link-State Tracking 40-25
Default Link-State Tracking Configuration 40-26
Link-State Tracking Configuration Guidelines 40-26
Configuring Link-State Tracking 40-26
Displaying Link-State Tracking Status 40-27
CHAPTER 41 Configuring TelePresence E911 IP Phone Support 41-1
Understanding TelePresence E911 IP Phone Support 41-1
Configuring TelePresence E911 IP Phone Support 41-2
Configuration Guidelines 41-2
Enabling TelePresence E911 IP Phone Support 41-3
Example 41-3
CHAPTER 42 Configuring IP Unicast Routing 42-1
Understanding IP Routing 42-2
Types of Routing 42-3
IP Routing and Switch Stacks 42-3
Steps for Configuring Routing 42-5
Configuring IP Addressing 42-6
Default Addressing Configuration 42-6
Assigning IP Addresses to Network Interfaces 42-7
Use of Subnet Zero 42-7
Classless Routing 42-8
Configuring Address Resolution Methods 42-9
Define a Static ARP Cache 42-10
Set ARP Encapsulation 42-11
Enable Proxy ARP 42-12