Cisco Catalyst 3750-X

Contents
xxxv
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Routing Assistance When IP Routing is Disabled 42-12
Proxy ARP 42-12
Default Gateway 42-12
ICMP Router Discovery Protocol (IRDP) 42-13
Configuring Broadcast Packet Handling 42-14
Enabling Directed Broadcast-to-Physical Broadcast Translation 42-15
Forwarding UDP Broadcast Packets and Protocols 42-16
Establishing an IP Broadcast Address 42-17
Flooding IP Broadcasts 42-17
Monitoring and Maintaining IP Addressing 42-18
Enabling IP Unicast Routing 42-19
Configuring RIP 42-20
Default RIP Configuration 42-21
Configuring Basic RIP Parameters 42-21
Configuring RIP Authentication 42-23
Configuring Summary Addresses and Split Horizon 42-23
Configuring Split Horizon 42-25
Configuring OSPF 42-25
Default OSPF Configuration 42-27
OSPF Nonstop Forwarding 42-28
Configuring Basic OSPF Parameters 42-29
Configuring OSPF Interfaces 42-30
Configuring OSPF Area Parameters 42-31
Configuring Other OSPF Parameters 42-32
Changing LSA Group Pacing 42-34
Configuring a Loopback Interface 42-34
Monitoring OSPF 42-35
Configuring EIGRP 42-35
Default EIGRP Configuration 42-37
EIGRP Nonstop Forwarding 42-38
Configuring Basic EIGRP Parameters 42-39
Configuring EIGRP Interfaces 42-40
Configuring EIGRP Route Authentication 42-41
EIGRP Stub Routing 42-42
Monitoring and Maintaining EIGRP 42-43
Configuring BGP 42-43
Default BGP Configuration 42-45
Nonstop Forwarding Awareness 42-47
Enabling BGP Routing 42-48