Cisco Catalyst 3750-X

Contents
xxxvi
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Managing Routing Policy Changes 42-50
Configuring BGP Decision Attributes 42-52
Configuring BGP Filtering with Route Maps 42-54
Configuring BGP Filtering by Neighbor 42-54
Configuring Prefix Lists for BGP Filtering 42-56
Configuring BGP Community Filtering 42-57
Configuring BGP Neighbors and Peer Groups 42-58
Configuring Aggregate Addresses 42-60
Configuring Routing Domain Confederations 42-61
Configuring BGP Route Reflectors 42-61
Configuring Route Dampening 42-62
Monitoring and Maintaining BGP 42-63
Configuring ISO CLNS Routing 42-64
Configuring IS-IS Dynamic Routing 42-65
Default IS-IS Configuration 42-66
Nonstop Forwarding Awareness 42-67
Enabling IS-IS Routing 42-67
Configuring IS-IS Global Parameters 42-69
Configuring IS-IS Interface Parameters 42-71
Monitoring and Maintaining ISO IGRP and IS-IS 42-73
Configuring Multi-VRF CE 42-74
Understanding Multi-VRF CE 42-75
Default Multi-VRF CE Configuration 42-77
Multi-VRF CE Configuration Guidelines 42-77
Configuring VRFs 42-78
Configuring VRF-Aware Services 42-79
User Interface for ARP 42-79
User Interface for PING 42-80
User Interface for SNMP 42-80
User Interface for HSRP 42-80
User Interface for uRPF 42-81
User Interface for VRF-Aware RADIUS 42-81
User Interface for Syslog 42-81
User Interface for Traceroute 42-82
User Interface for FTP and TFTP 42-82
Configuring Multicast VRFs 42-83
Configuring a VPN Routing Session 42-83
Configuring BGP PE to CE Routing Sessions 42-84
Multi-VRF CE Configuration Example 42-85
Displaying Multi-VRF CE Status 42-88