Cisco Catalyst 3750-X

Contents
xxxviii
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Unsupported IPv6 Unicast Routing Features 43-8
Limitations 43-9
IPv6 and Switch Stacks 43-9
Configuring IPv6 43-10
Default IPv6 Configuration 43-11
Configuring IPv6 Addressing and Enabling IPv6 Routing 43-11
Configuring Default Router Preference 43-13
Configuring IPv4 and IPv6 Protocol Stacks 43-14
Configuring DHCP for IPv6 Address Assignment 43-15
Default DHCPv6 Address Assignment Configuration 43-15
DHCPv6 Address Assignment Configuration Guidelines 43-15
Enabling DHCPv6 Server Function 43-16
Enabling DHCPv6 Client Function 43-18
Configuring IPv6 ICMP Rate Limiting 43-19
Configuring CEF and dCEF for IPv6 43-19
Configuring Static Routing for IPv6 43-20
Configuring RIP for IPv6 43-21
Configuring OSPF for IPv6 43-22
Configuring EIGRP for IPv6 43-24
Configuring HSRP for IPv6 43-24
Enabling HSRP Version 2 43-25
Enabling an HSRP Group for IPv6 43-25
Displaying IPv6 43-27
CHAPTER 44 Configuring HSRP 44-1
Understanding HSRP 44-1
HSRP Versions 44-3
Multiple HSRP 44-4
HSRP and Switch Stacks 44-5
Configuring HSRP 44-5
Default HSRP Configuration 44-5
HSRP Configuration Guidelines 44-6
Enabling HSRP 44-6
Configuring HSRP Priority 44-8
Configuring MHSRP 44-10
Configuring HSRP Authentication and Timers 44-10
Enabling HSRP Support for ICMP Redirect Messages 44-12
Configuring HSRP Groups and Clustering 44-12
Troubleshooting HSRP for Mixed Stacks of Catalyst 3750-X, 3750-E and 3750 Switches 44-13
Displaying HSRP Configurations 44-13