Cisco Catalyst 3750-X

Contents
xlii
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Configuring Advanced DVMRP Interoperability Features 48-54
Enabling DVMRP Unicast Routing 48-54
Rejecting a DVMRP Nonpruning Neighbor 48-55
Controlling Route Exchanges 48-58
Limiting the Number of DVMRP Routes Advertised 48-58
Changing the DVMRP Route Threshold 48-58
Configuring a DVMRP Summary Address 48-59
Disabling DVMRP Autosummarization 48-61
Adding a Metric Offset to the DVMRP Route 48-61
Monitoring and Maintaining IP Multicast Routing 48-62
Clearing Caches, Tables, and Databases 48-62
Displaying System and Network Statistics 48-63
Monitoring IP Multicast Routing 48-64
CHAPTER 49 Configuring MSDP 49-1
Understanding MSDP 49-1
MSDP Operation 49-2
MSDP Benefits 49-3
Configuring MSDP 49-3
Default MSDP Configuration 49-4
Configuring a Default MSDP Peer 49-4
Caching Source-Active State 49-6
Requesting Source Information from an MSDP Peer 49-8
Controlling Source Information that Your Switch Originates 49-8
Redistributing Sources 49-9
Filtering Source-Active Request Messages 49-11
Controlling Source Information that Your Switch Forwards 49-12
Using a Filter 49-12
Using TTL to Limit the Multicast Data Sent in SA Messages 49-14
Controlling Source Information that Your Switch Receives 49-14
Configuring an MSDP Mesh Group 49-16
Shutting Down an MSDP Peer 49-16
Including a Bordering PIM Dense-Mode Region in MSDP 49-17
Configuring an Originating Address other than the RP Address 49-18
Monitoring and Maintaining MSDP 49-19