Cisco Catalyst 3750-X

Contents
xli
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Configuring Source Specific Multicast Mapping 48-17
SSM Mapping Configuration Guidelines and Restrictions 48-17
SSM Mapping Overview 48-18
Configuring SSM Mapping 48-20
Monitoring SSM Mapping 48-22
Configuring PIM Stub Routing 48-22
PIM Stub Routing Configuration Guidelines 48-22
Enabling PIM Stub Routing 48-23
Configuring a Rendezvous Point 48-24
Manually Assigning an RP to Multicast Groups 48-24
Configuring Auto-RP 48-26
Configuring PIMv2 BSR 48-30
Using Auto-RP and a BSR 48-34
Monitoring the RP Mapping Information 48-35
Troubleshooting PIMv1 and PIMv2 Interoperability Problems 48-35
Configuring Advanced PIM Features 48-35
Understanding PIM Shared Tree and Source Tree 48-35
Delaying the Use of PIM Shortest-Path Tree 48-37
Modifying the PIM Router-Query Message Interval 48-38
Configuring Optional IGMP Features 48-38
Default IGMP Configuration 48-39
Configuring the Switch as a Member of a Group 48-39
Controlling Access to IP Multicast Groups 48-40
Changing the IGMP Version 48-41
Modifying the IGMP Host-Query Message Interval 48-42
Changing the IGMP Query Timeout for IGMPv2 48-42
Changing the Maximum Query Response Time for IGMPv2 48-43
Configuring the Switch as a Statically Connected Member 48-44
Configuring Optional Multicast Routing Features 48-44
Enabling CGMP Server Support 48-45
Configuring sdr Listener Support 48-46
Enabling sdr Listener Support 48-46
Limiting How Long an sdr Cache Entry Exists 48-46
Configuring an IP Multicast Boundary 48-47
Configuring Basic DVMRP Interoperability Features 48-49
Configuring DVMRP Interoperability 48-49
Configuring a DVMRP Tunnel 48-51
Advertising Network 0.0.0.0 to DVMRP Neighbors 48-53
Responding to mrinfo Requests 48-54