CNC-Step KinetiC-NC - Tab: Settings; Z-Values of Material and Machine; Material Top

KinetiC-NC
User Manual
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 117
Support: +49 (0)2831/91021-50
10.11.2018
Tab: Setti ngs
This field displays the general data for the machine or workpiece / material.
Z- v a l ues o f materi al a n d mach ine
Material top:
Highest part of the material to be milled / drilled
Z-level security:
Height at which it is safe to travel at rapid traverse (G0) without colliding with the clamping device.