1 General Information
The present control software was designed on the basis of all common at the time of development
and known guidelines and was very elaborate and carefully tested. Nevertheless, a guarantee for
faultless function cannot be given. The developers guarantee that the KinetiC-NC control, in
conjunction with suitable electrical and mechanical components in the sense of the description and
user instructions, is basically suitable for the intended purpose.
Liability
Any liability for consequential damage or loss of profit, interruption of business, loss of information
etc. is excluded. The KinetiC-NC control software is a component that can only be used in
conjunction with a suitable personal computer and suitable hardware. It is by no means an
independent controller.
Since mistakes, despite all efforts, can never be completely avoided, we are grateful for any note.
The user guides
Since not all users need all the information about the control hardware and software, the
documentation has been divided into several manuals. For hardware and wiring information, refer
to the manuals for each hardware module. The software installation guide and general operating
instructions are included in the KinetiC-NC User Guide.
The Reference Manual is intended for the advanced user who programs NC programs or macros
"by hand" or for machine builders who need to adapt the controller to a new machine.
Manufacturer:
Benezan Electronics
Stauffenbergstraße 26
72108 Rottenburg
Germany
Distribution:
CNC-STEP GmbH & Co. KG
Siemensstraße 13-15
47608 Geldern
Germany
To Next Page
Loading...
