No acce ss?
If you do not have access to certain buttons or menu items, make sure which user you are currently
logged in with. This is indicated in the status bar at the bottom of the main window (e.g., "User:
Default User"). If there is "User: logged off", you must first log in to have access to machine
functions.
To do this, open the login dialog via the menu-> user-> login ... A small dialog opens in which the
desired user can be selected. In the Password field, the corresponding password is entered and
confirmed with "Enter".
The default user has sufficient rights to work with the machine. By default, he has not given a
password, so you just have to confirm with "Enter" to close the dialog and log in. Users without a
password will automatically be logged in the next time the program starts without the dialog
opening. The default user may not change any settings and machine parameters. The user "Client-
Admin" has the beginning password "1234". This administrator has the right to change machine
settings. On request, users can be assigned passwords to protect the machine against misuse (see
chapter User management).
If you leave the workplace without switching off the machine, you can also log out for security
reasons by clicking "Menu-> User-> Logout ...".
The user is then logged off and the machine can no longer be operated.
Parameter settings
If you purchased the software together with a finished machine and selected the appropriate model
as described above when you first started the software, no further parameter setting is required, and
you can skip this chapter.
In case you have made a mistake in the selection, or you want to adapt the software later to another
machine, you can also undo the selection and load the parameter set for another machine model.
Open the import dialog (File menu -> Import settings) and then the file selection dialog by pressing
the "Default parameter ..." button.
To Next Page
Loading...
